model：kp-114-110
characteristic：water-based concentrated products
scope of application：it is suitable for the demoulding of automobile roofs made of various composite materials such as wet and dry processes.
performance advantage：
1. the working temperature is 140-180℃.
2. spray the release agent on the upper and lower molds, send the composite layer into the hot pressing mold, and heat it for about 1 minute after pressing and curing to form the initial shape of the ceiling.
3. the spraying flow rate is generally 1000-1200g/min, and one spraying can continuously demould 3-7 molds.
model：kp-114-115
characteristic：water-based concentrated products
scope of application：it is suitable for the demoulding of automobile roofs made of various composite materials such as wet and dry processes.
performance advantage：
1. the working temperature is 140-180℃.
2. spray the release agent on the upper and lower molds, send the composite layer into the hot pressing mold, and heat it for about 1 minute after pressing and curing to form the initial shape of the ceiling.
3. the spraying flow rate is generally 1000-1200g/min, and one spraying can continuously demould 3-7 molds.
model：iadc-114-43 phb
characteristic：water-based concentrated product, low voc
scope of application：it is suitable for the demoulding of automobile roofs made of various composite materials such as wet and dry processes.
performance advantage：
1. it has very good demoulding performance, and also has a good demoulding effect in areas that are difficult to demold.
2. the suitable mold temperature of polyurethane is 55-70℃.
3. the suitable mold temperature of eva can be as high as 250℃.
4. it can be used by spray gun or brush.
5. when spraying, the air pressure needs to be adjusted to obtain better drying and uniformity.
